Page 1 of 1
Dedicated server setup FAILED
Posted: Mon Jul 28, 2008 11:58 am
by JigglyWiggly
EDIT:
Scroll down to my last posts to see what is going on now.
Posted: Mon Jul 28, 2008 12:28 pm
by Neico
using the wiki would help you more, and us less writing...
http://wiki.neic0.de/?title=Category:ServerOP
that link is also on the downloads section under dedicated server on the homepage >.>
Posted: Tue Jul 29, 2008 3:01 am
by JigglyWiggly
I have to extract gcfs too? This is such an ass hole way of doing it.
Posted: Tue Jul 29, 2008 5:25 am
by JigglyWiggly
Install: http://www.steampowered.com/download/hldsupdatetool.exe
Create a bat file and throw this inside: hldsupdatetool -command update -game "tf" -dir C:\***srcds folder*** And run the bat, with the ***srcds folder*** changed to your srcds directory. This will download TF2 content so it sets up your directories.
While your at it, download "Counter-Strike Source" content as well. Just replace the "tf" with "Counter-Strike Source" and run the bat again.
You should now have an orangebox folder. Before you enter this folder right click on the "hl2" folder which was downloaded by the hldsupdatetool when you downloaded CS:S and press copy.
Enter the orangebox folder and paste the hl2 folder you copied previously. You will need this for models and such.
Inside the orangebox folder, create two new folders, "ep2" and "episodic"
This made little to no sense, it is poorly written as a matter of fact terrible. The garrysmod wiki was clearly stated and could be followed with a matter of ease. This is bull, I am terribly confused I installed hldsupdatetool to D:\SRCDS but now I'm terribly confused on where to go from now. Can anyone help?
EDIT: Actualyl I just read the gmod wiki again and I could make some sense of this, I'll report back if I find myself in a problem.
Posted: Tue Jul 29, 2008 7:19 am
by JigglyWiggly
Well I followed the guide exactly and I used this to start it up, srcds.exe -console -game obsidian +map oc_docks.bsp +maxplayers 6 -autoupdate
Nobody can join from my external ip adress but I did connect 192.168.0.155 which is my server's lan ip and I can connect fine. Is something wrong with this thing or what?
Posted: Tue Jul 29, 2008 8:28 am
by JigglyWiggly
Also the correct ports are open for the server, so there is no problem there.
Posted: Thu Jul 31, 2008 10:21 am
by JigglyWiggly
Is anyone willing to help?
Posted: Fri Aug 08, 2008 5:49 am
by JigglyWiggly
Solved.
Posted: Fri Aug 08, 2008 6:26 am
by Tono-Tako
JigglyWiggly wrote:Solved.
how do you solved?
what problems did you have?
server ip?
Posted: Wed Aug 13, 2008 5:55 am
by JigglyWiggly
Yeah I just did -ip "lan ip" -port 27016